Product detail

Manson GL - Gloves Series

Single-component ink developed for glove printing, including boxing gloves and protective sports equipment on foam and synthetic leather surfaces.

Manson GL - Gloves Series product visual

At a glance

Product family
Printing Inks
Division
Manufacturing - MANSON
Documents
Overview public · full TDS on request

Used in

All Printing Inks products

Public specifications

Public product overview for technical selection.

Substrates

Boxing glovesPVC foamPU foamSynthetic leather (PU/PVC)Protective sports gear

Applications

Glove printingProtective equipment decorationFoam and synthetic surface printing

Technical specifications

  • Single-component screen printing ink — ready to use, no hardener required
  • Unlimited pot life in single-component use
  • Moisture and humidity controlled high gloss
  • Touch dry within minutes under normal air circulation
  • Full cure 7 days at room temperature — test performance only after full cure
  • Storage 15-30 C in original, tightly closed containers
  • Shelf life 12 months unopened under recommended conditions
  • Thinning with AIC Diluent and AIC Retarder up to 25-30% combined
  • Colour range: full standard opaque range in glossy finish
  • Four-colour process (CMYK) set for halftone and process printing
  • Tri-chromatic three-ink mixing system for extended colour range
  • Pantone matching available on request
  • Metallic (gold, silver) and high-visibility fluorescent shades available
  • Custom shades available on request; minimum order quantity may apply
  • ZDHC MRSL Level 1: 02 Black only — SGS test report TR2681024, issued 13 August 2025 by SGS Supervise Gözetme Etüd Kontrol Servisleri A.Ş., Istanbul
  • ZDHC MRSL Level 1 covers the certified grades listed below only — the remaining grades in the colour range are not certified

Colour grades (17)

TP White01 White02 Black03 Lemon Yellow04 Golden Yellow06 Red07 Crimson Red09 Blue014 Violet016 Magenta19 Silver020 Gold021 Fluorescent Yellow022 Fluorescent Orange023 Fluorescent Pink024 Fluorescent Red026 Fluorescent Green

ZDHC MRSL Level 1 certified grades (1)

02 Black

Compliance notes

ZDHC MRSL Level 1 - GL 02 BlackHeavy metal freeFree from restricted substances

Specifications are published from the product Technical Data Sheet. Performance depends on the substrate, its surface condition, environmental conditions, and equipment settings — test under actual production conditions before full-scale use. The complete TDS is shared after registration and AIC review.

Next step

Questions & answers

What customers ask about this product.

What is GL?

A single-component screen printing ink developed specifically for glove printing — boxing gloves, protective sports equipment, and similar foam and synthetic leather surfaces. No hardener required.

What is it used for?

Boxing gloves, sports gloves, protective equipment, foam and synthetic leather surfaces.

What does it do well?

Excellent adhesion on foam and synthetic surfaces. Outstanding flexibility, which glove printing demands. High gloss. Good light fastness. Moisture-resistant performance suited to glove use. And no pot life to manage — the ink can sit on the press through a shift.

What does it not do well, and what should I use instead?

Solvent and chemical resistance are the lowest in the range, as with all single-component Manson grades. Where a glove will be cleaned with strong agents, BG in two-component form is the better choice.

How is it used?

Ready to use, no hardener. Adjust viscosity with the recommended AIC diluent within the stated limits.